线性调频半导体激光衍射光栅干涉仪

介绍一种以线性调频半导体激光为光源的衍射光栅干涉仪。激光与光栅上衍射的±１级衍射波会合，由于有光程差而发生光拍频，测量拍频信号的相位移则可测得光栅的位移。设计了一种克服激光波长漂移和空气折射率变化影响的对称差动光路，使这种方法达到实用化的程度，分辨力达到纳米级。此外，还介绍了应用于接触干涉仪的实验情况。     

分布式干扰仿真研究

在简要分析旁瓣对消原理的基础上,通过建模与仿真对多干扰机分布式干扰对抗雷达旁瓣对消的效果进行了分析,结果表明,多干扰机分布式干扰是对抗旁瓣对消的有效技术途径.     

传感器安装对平板气动热测量精度的影响

对高超声速飞行器来说，气动热的准确预测是其合理选择防热材料及热结构设计的重要依据，但目前在激波风洞试验中气动热的高精度测量仍较为困难，热流的测量精度受到诸多非理想因素的影响，但传感器安装对热流测量精度的影响却鲜见研究。选取平板模型来研究传感器非理想安装对气动热测量精度的影响，针对不同的传感器安装偏差(凸出或凹入模型表面0.1~0.5 mm)，分析不同雷诺数下传感器安装对气动热测量精度的影响规律及机理。研究结果表明:传感器安装对气动热测量精度有较大影响，凸出安装会导致热流测量结果偏大，而凹入安装则会导致测量结果偏小，热流偏差会随着安装偏差的增大而增大，且高来流雷诺数下传感器非理想安装所引起的热流误差更大；以边界层当地厚度对凹凸程度无量纲化，非理想安装带来的测量偏差只与该无量纲参数相关。研究结果能够为气动热测量的实验方案设计及测量误差分析提供一定的理论指导。      

Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

一种高超声速滑翔飞行器轨迹智能预测方法

针对高超声速滑翔飞行器(Hypersonic glide vehicle, HGV)机动性强、轨迹预测困难的问题,选取气动加速度作为预测参数,提出了一种基于集合经验模态分解和注意力长短时记忆网络的HGV轨迹智能预测方法。首先,以HGV六自由度运动方程为基础,分析了其机动特性和气动力变化规律,建立了动力学跟踪模型,对气动加速度进行实时估计;其次,利用集合经验模态分解对估计的气动加速度进行分解和重构,减弱噪声影响,避免对预测模型的干扰;最后,利用去噪后的气动加速度数据对注意力长短时记忆网络进行训练,进而预测未来气动加速度数据并重构HGV未来轨迹,实现轨迹的在线预测。实验仿真表明,该方法能有效预测HGV机动轨迹,预测精度高、稳定性好。     

A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.     

高焓激波风洞喷管流场非平衡特性研究

高焓激波风洞是开展高超声速流动研究的重要地面模拟设备,但其产生的高焓气流在喷管中的膨胀过程是一种典型的热化学非平衡流动,试验段特征参数通过直接实验测量难以完全确定。本文通过求解耦合双温度模型的轴对称Navier-Stokes方程,研究了高焓激波风洞中典型状态下气流的热化学非平衡流动特性,分析了焓值对非平衡特性的影响规律。结果表明,喷管出口自由流均匀区域达到出口截面直径的75%以上,能够为实验提供足够的空间;喷管出口自由流处于热化学非平衡状态,在喷管喉道后约1/5喷管长度处气流即已处于冻结流状态,组分浓度和振动温度随气流流动基本不变;焓值在8.4MJ/kg~19.5MJ/kg之间变化时,非平衡程度随着焓值的增加而增强,但是低焓值时非平衡程度的增强更加剧烈。     

一种孔径和频率二维稀疏的步进频SAR成像方法

 步进频率信号(SFWs)在不增加雷达系统瞬时带宽的情况下能够获得高的距离向分辨率的同时,也存在着抗干扰能力较差及其等效重复频率较低的问题,并且在方位向积累时间内由于雷达载机工作状态的变化,会导致方位向的数据录取不完整。针对上述问题,提出一种孔径和频率二维稀疏的步进频合成孔径雷达(SAR)成像方法。首先,分析了稀疏步进频率信号(SSFWs)的SAR成像模型,然后基于压缩感知理论完成距离向成像处理。其次,针对稀疏孔径的回波数据,通过构造成像算子和压缩感知重建模型的方法实现其距离徙动校正和方位压缩处理,进而获得二维成像结果。相比于传统的步进频率信号SAR成像,利用所提方法能够在少量的频率资源和雷达回波数据情况下实现准确的SAR成像。最后,通过对仿真和实测的步进频率雷达数据进行成像处理,验证了所提方法的有效性和可行性。     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

液压余度舵机同步传动研究

几个舵机驱动同一控制对象,通道间产生力的纷争,本文采用均衡网络来减轻力的纷争,而均衡网络的参数则根据解耦控制理论导出。实际系统的实验证明本文所提出的消除余度通道间力纷争保证同步传动的方案是有效的。文章给出了最优均衡网络的参数设计公式。